Model/Brand/Package
Category/Description
Inventory
Price
Data
-
![]()
Category: Board to board connectorDescription: SAMTEC SFMC-103-03-S-D-TR Board-To-Board Connector, 1.27mm, 6Contacts, Receptacle, SFMC Series, Through Hole, 2Rows1901 -
![]()
Category: Ceramic CapacitorDescription: Multi layer ceramic capacitor MLCC - with lead 100volts 6800pF 5% C0G3206 -
![]()
Category: capacitanceDescription: Cap Ceramic 0.0033uF 1000V Y5P 10% (11 X 4mm) Radial 5mm 85℃ T/R4278 -
![]()
Category: capacitanceDescription: Cap Ceramic 27pF 1000V SL0 5% (6.5 X 4mm) Radial 5mm 125℃ Ammo Pack3457 -
![]()
Category: Film CapacitorDescription: CORNELL DUBILIER WMC2S12KR Film Capacitor, 0.012μF, PET (Polyester), 200V, WMC Series, ± 10%, Axial Leaded9523 -
![]()
Category: capacitanceDescription: Cap Ceramic 12pF 1000V SL0 5% (6.5 X 4mm) Radial 5mm 125℃ T/R4907 -
![]()
Category: Ceramic CapacitorDescription: Cap Ceramic 0.01uF 1000V Y5V -20% to 80% (11 X 4mm) Radial 5mm 85℃ T/R7608 -
![]()
Category: capacitanceDescription: Cap Ceramic 0.001uF 3000V Z5U 20% (8.5 X 4mm) Radial 7.5mm 85℃ T/R5392 -
![]()
Category: Ceramic CapacitorDescription: Cap Ceramic 0.001uF 1000V Y5P 10% (7.5 X 4mm) Radial 5mm 85℃ T/R2965 -
![]()
Category: capacitanceDescription: S Series Ø 7.5mm 100pF 1kV ±10% S3N General Puprose Ceramic Disc Capacitor6688 -
![]()
Category: capacitanceDescription: Cap Ceramic 10pF 1000V SL0 10% (6.5 X 4mm) Radial 5mm 125℃ T/R1920 -
![]()
Category: Current filtering deviceDescription: PTC Resettable Fuse 0.5A(hold) 1A(trip) 72V 40A 0.77W 4s 0.5Ω Radial 7.9 X 3mm T/R3653 -
![]()
Category: Plug in resistorDescription: RWM 4x10 Series 3W, axial enameled wire wound power resistor, axial lead, fire-resistant Power rating at 70 ° C | 2.6W -------- Power at 25 ° C | 3W Resistance tolerance | ± 5% Temperature coefficient |+75ppm/° C typical limiting element voltage | 120V Temperature cycling | -55 ° C →+200 ° C C Body Length | 12 mm Body Diameter | 5.5 mm Lead Length | 25 mm min. Lead Diameter | 0.8 mm ### Enamel axial and radial -2.5 to 50W small high-power resistor series, suitable for harsh environments. Their high stability and reliability make them particularly suitable for protecting circuits. The resistance wire element is wound on a high-purity ceramic substrate and uses a fully welded top cover and lead structure to provide considerable strength and damage resistance. The enamel protective coating has a resistance to all normal cleaning solvents for printed circuit boards. Application instructions. The distance between the bending point of the output end and the shell should not be less than 1.5mm. It is recommended that the minimum bending radius be 1mm. In order to achieve full load rated power consumption, the distance between the end welding and the main body should not be less than 4mm. When cool, enamel has excellent insulation resistance; But as the temperature rises, the resistance coefficient will decrease. Therefore, if a resistor operates at or near maximum temperature, it cannot be classified as an insulation resistance and should not come into contact with any conductive material.9787 -
![]()
Category: Plug in resistorDescription: RWM 4x10 Series 3W, axial enameled wire wound power resistor, axial lead, fire-resistant Power rating at 70 ° C | 2.6W -------- Power at 25 ° C | 3W Resistance tolerance | ± 5% Temperature coefficient |+75ppm/° C typical limiting element voltage | 120V Temperature cycling | -55 ° C →+200 ° C C Body Length | 12 mm Body Diameter | 5.5 mm Lead Length | 25 mm min. Lead Diameter | 0.8 mm ### Enamel axial and radial -2.5 to 50W small high-power resistor series, suitable for harsh environments. Their high stability and reliability make them particularly suitable for protecting circuits. The resistance wire element is wound on a high-purity ceramic substrate and uses a fully welded top cover and lead structure to provide considerable strength and damage resistance. The enamel protective coating has a resistance to all normal cleaning solvents for printed circuit boards. Application instructions. The distance between the bending point of the output end and the shell should not be less than 1.5mm. It is recommended that the minimum bending radius be 1mm. In order to achieve full load rated power consumption, the distance between the end welding and the main body should not be less than 4mm. When cool, enamel has excellent insulation resistance; But as the temperature rises, the resistance coefficient will decrease. Therefore, if a resistor operates at or near maximum temperature, it cannot be classified as an insulation resistance and should not come into contact with any conductive material.4818 -
![]()
Category: Classification of electronic componentsDescription: Var MOV 385VAC/505VDC 4500A 620V Thru-Hole Radial T/R4401 -
![]()
Category: Classification of electronic componentsDescription: Resettable Fuses - PPTC RUSBF185-26088 -
![]()
Category: Classification of electronic componentsDescription: Resettable Fuses - PPTC RUEF135-22781 -
![]()
Category: fuseDescription: PTC Resettable Fuse 1.35A(hold) 2.5A(trip) 33V 40A 0.84W 4.5s 0.059Ω Radial 7.4 X 3 X 14.2mm T/R5506
